Construction technology insulation materials including insulation, crack and waterproof protective layer facing layer three components. Wherein the insulation layer is the powder particles of polystyrene insulation mortar; cracking of the protective layer is coated alkali resistant fiberglass mesh is added in cracking mortar; waterproof layer is a protective layer applied to the surface of the elastic primer, decorative coatings and surface for the tile. The process system is in cash slurry materials and applications developed on the basis of developed. Why insulation coating excellent prospects for development?
High temperature is one of the main chemical material storage tank explosion, the explosion of the tank in order to prevent chemical materials, have good heat insulation work on chemical storage tanks.
The construction industry, the building during use need to constantly consume a lot of energy, mainly for heating, air conditioning, ventilation, lighting, hot water supply, cooking, household appliances, etc., about 30% to 40% of human energy consumption, and heating and air conditioning accounts for the vast majority. At present, China is building mostly high-energy non-energy-efficient buildings, heating energy consumption of unit building area about three times as high as in developed countries with similar climatic conditions of the new building. Thus, the EEB has attracted increasing attention. As early as February 2000, the Ministry of Construction issued a "civil energy-saving regulations," the ministerial decree.
Widespread attention at home and abroad the production and application of insulation materials in construction, and strive to significantly reduce energy consumption, thereby reducing environmental pollution and the greenhouse effect. Currently, the global building insulation coatings market is growing rapidly.
Importance of energy efficiency in buildings and developed some effective measures have achieved great success, to make the building energy consumption in these countries dropped significantly. Such as Denmark in 1985 increased by 30% compared to 1972 heating area, but the heating energy consumption was reduced by 3.18 million tons of standard coal. Heating energy consumption of the country's total energy consumption in the proportion dropped from 39-28%. Therefore, the development and application of building insulation coating is more and more attention around the world, actively develop green insulation material products, from raw material preparation, production and use and deal with future issues require to maximize conservation of resources and reduction of environmental Weihai . Whole new insulation materials are emerging.
China's urbanization process is a step forward in every year in the construction of a large number of new buildings. In the current energy saving environment, building energy efficiency has become the focus of attention of the international relevant policies and measures have been put forward. EEB is to reduce the transfer of indoor and outdoor temperature, the inside and outside buildings envelope insulation.
With the development of technology, new materials are used in a variety of buildings, building insulation coating insulation can not only solve problems, but also to reduce the civil engineering costs. Insulation coating is a coating solution characteristics, thermal conductivity 0.03W / m.K, just brushing the building interior thin 3mm, the winter indoor temperature was raised to more than 3 ℃. If applied on the device, insulation inhibition rate can be increased ninety percent saving rate of more than eighty percent; if applied in places where water condensation can completely eliminate the condensate produced; if applied to the surface of the object 1100 ℃, can object surface temperature reduction above 1000 ℃. In addition, the insulation coating non-toxic, tasteless, hardly any volatile substances, but also has no flash point, flammable non-explosive high-security advantages.
Insulation coating is in a new paint products in our municipalities, provincial capitals and other economically developed areas, the state has mandated residential or public buildings must be energy-efficient insulation, along with energy conservation efforts continue to increase, to achieve energy efficiency in buildings will range growing. Insulation coating has broad market prospects, a huge market space.